Continuing the process to change the upholstery of your chair, the second step is to make the padding of the saddle, so hopefully we can develop a cushion as comfortable as possible using polyester foam of varying sizes, trying to place them in a pyramid. To do this you must cut a piece of foam about 30 mm. covering the total cushion of the chair, making sure that protrude 3 cm. on each side of the frame, quickly secure it with staples. Next, cut two pieces of foam of 20 mm., One with a smaller surface area than before, once using the adhesive for textiles, joins the pieces to build the pyramid,

once ready, cover it with a remnant of thinner foam, which should be laid down in the frame to go compacting the structure and obtain an appropriate manner. Third step: placing the material chosen for what is necessary to cut leaving a margin of 10 cm. per side on the extent of the structure or frame. We now must focus perfectly the fabric, taking care to follow the order of the design to avoid deforming or leave a wrinkle, ideally as the lining becomes tense and without the creases that are applied to the base are noticed at the top. Finally, ensures the fabric to the frame with staples and put a cotton fabric cut to match the chosen design and color, to cover all the staples placed in the upholstery tacks and terms subject to flat or sewing it by hand. With these guidelines, we have modern chairs is easier and cheaper, or you can learn to upholster coffee tables, there are variety of techniques that are sure to spark creativity.